[TenTec] Scout has vy low Pwr out on some bands
Lee WA3FIY
wa3fiy at radioadv.com
Wed Jul 16 09:58:41 EDT 2014
Actually, the Q-Tip will likely leave fibers behind. When I do a repair here I do an inspection
with a 20 X inspection microscope to check soldering, card edge connectors and anything
else important. I formerly used Q-Tips for cleaning but after looking at the finished job thru
the microscope that was the end of Q-Tips. I went to a small brush as Ken suggests. If a
bristle falls off you can likely see that with the naked eye.
73 de -Lee- WA3FIY
On 15 Jul 2014 at 21:47, Ken Brown wrote:
>
> I suggest that a small paintbrush may be a better option than a Q-Tip.
> The cotton fibers of a Q-Tip could catch on something and be left
> behind on the contact. I think with a tiny paint brush you have less
> chance of leaving a bristle behind.
>
> DE N6KB
> _______________________________________________
More information about the TenTec
mailing list