[TenTec] Omni VI+ to computer issue

[Bob McGraw - K4TAX]

It is just one of those "computer things".

I'm setting up a computer, the software, the hardware and such in 
preparation for Field Day operations.  This will entail several 
differentsoftware applications being available, largely for individual 
operator preferences.  I've found when I choose one application and get 
things set up and the save and close the file and then open another and do 
the same, when I go back to the previous the parameters have changed. 
Grrrrr!   It is just one of those dang "computer things".

I'm glad I'm an "RF guy" because those "1"s and "0"s drive me crazy.   No 
comment on the crazy part.  I chalk it up the result of too much RF exposure 
to the brain.


73
Bob, K4TAX


----- Original Message ----- 
From: "Jim Allen" <jim.allen at longhornband.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Tuesday, June 17, 2014 8:16 PM
Subject: Re: [TenTec] Omni VI+ to computer issue


> The other day I wrote in about the problem I was having with the Omni VI+,
> taking the place of the Omni VI Opt. 3, with respect to interfacing with
> the computer running Win-EQF.
>
> It was working before and now I have been getting error messages about
> opening a COM port for the TNC.  The specific gripe was that both the TNC
> and the Omni VI+ could not be on COM3.  OK!  Neither did it work on COM1,
> 2, 4, or 5!
>
> Today, after spending some time with the manual for the Omni VI+ and the
> Win-EQF software on my knee, I realized I don't HAVE a TNC so why is it
> selected "ON?"
>
> I selected "OFF" and no more error messages.  Why, or how, it got changed
> is a mystery.
>
> Never mind!
>
> 73 de W6OGC  Jim Allen
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>