[TenTec] Argo V and digital modes

[Mike Bryce]

back in the day, 

I ran RTTY on HF with a Triton 4.

You ran it at full bore, keeping the ALC LED just from lighting. 

The limits were how the power supply could handle the 20 amp draw for 10 minutes or more (running those rtty pictures!) 
 The triton was one of a very small group that could handle full power key down for hours at at time.


Mike Bryce, WB8VGE
 the heathkit shop
SunLight energy systems
J e e p
o|||||||o






On Sep 22, 2014, at 8:15 AM, Bob McGraw - K4TAX <RMcGraw at Blomand.net> wrote:

> What ever level it takes to keep below the ALC threshold would be the correct power level.  Same for the  100 watt rigs too.
> 
> However, with the Argonaut VI the ALC circuit is of different design and one can run a full 10 watts.
> 
> In all cases, do not have any Speech Processing engaged.
> 
> 73
> Bob, K4TAX
> 
> 
> 
> 
> ----- Original Message ----- From: <kd2e at comcast.net>
> To: <tentec at contesting.com>
> Sent: Sunday, September 21, 2014 9:43 PM
> Subject: [TenTec] Argo V and digital modes
> 
>