[TenTec] Help Identifying Omni 6 Cable

[Clayton Brantley]

Ron:  I think you are right.  I look at my books and they show a cable hooked between the Omni VI and the amp.with the other end open.  Another drawing shows another cable hooked to the Molex end and to the amp and tuner.It's called 254 Extension Cable.  The other DB 25 end is still open.  Think it's used for the remote tuning or computer.
You might go to the TenTec site and they still have the old manuals for download.  I can send you a copy but do notthink it would fly using the TenTec reflector.
73 Clayton N4EV

      From: Ron | K5XK <qrzthedx at gmail.com>
 To:  The other c tentec at contesting.com 
 Sent: Tuesday, October 20, 2015 3:13 PM
 Subject: [TenTec] Help Identifying Omni 6 Cable
   
My documentation is misplaced and I need help identifying a factory
interconnection cable held-over from my Omni VI days.  It has a DB-25 from
the interface port on the Omni 6 with a 2nd DB-25 in parallel (on a short 4"
cable), to a 15 pin molex (8 active pins).  I'm pretty sure it was an
interconnecting cable between the Omni VI and the 253 auto-tuner and Herc II
amp, but isn't there was an additional cable that mated with the 2nd DB-25,
perhaps to the amp or 253 tuner?  

Thanks/73, Ron, K5XK



_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec