[TenTec] Fw: Relays for a Paragon. Hopefully......

[Gary J FollettDukes HiFi]

I have an Omni 6 meter, same meter.

Gary



> On Oct 30, 2015, at 5:10 PM, John King via TenTec <tentec at contesting.com> wrote:
> 
> Do you still have the Paragon's S meter ?
> 
>      On Thursday, October 29, 2015 1:08 PM, Rodney <w3krq at dejazzd.com> wrote:
> 
> 
> I still have this complete with 14 relays for sale these relays are surface 
> mount.  This would be good insurance at 110.00 when it cost 110.00 labor at 
> TenTec.
> 
> -----Original Message----- 
> From: Rodney
> Sent: Saturday, October 24, 2015 5:32 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] Relays for a Paragon. Hopefully......
> 
> I have a low pass board for a Ten Tec Eagle . I though I needed a relay
> found out the trouble was on the tuner board. I now have a complete board
> for the Eagle if I had sent the Eagle down for repairs it would have cost me
> shipping and 110.00 for labor plus parts, It cost me 190.00 for the board, I
> no longer have the Eagle so I am selling the low pass board for 140.00
> shipped.
> 
> -----Original Message----- 
> From: Wade Staggs
> Sent: Saturday, October 24, 2015 5:17 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] Relays for a Paragon. Hopefully......
> 
> *Thanks Peter,*
> *                        If we can't get OEM? My plan will now be to
> replace them all. And thanks again for the advise.*
> *                                                      73 from Wade/KJ4WS*
> 
> On Sat, Oct 24, 2015 at 3:56 PM, Peter Frenning [OZ1PIF] <peter at frenning.dk>
> wrote:
> 
>> Den 24-10-2015 kl. 21:57 skrev Wade Staggs:
>> 
>>> *Paul, at Ten Tec says that the Relays for the Low Pass Filter Board for
>>> the Paragon, are no longer available. Written on the white body of the
>>> relay is Wabash and the part # on the relay is 1925-3-2 ...... I am
>>> finding
>>> them pretty Unobtainium from all of my usual sources also. Does anyone
>>> have
>>> a decommissioned Paragon with a good Low Pass Filter Board? Or any spares
>>> of this relay? We have found some Wabash Reed Relays that are a perfect
>>> Sub. Exact Pin Out and Dimensions. The relays we found do the exact same
>>> job in a Collins KWM-380. I just hate to use Non OEM Parts, no matter how
>>> close the match is.*
>>> *                                                    73 to All from
>>> Wade/KJ4WS*
>>> 
>>> Please note, if you have to go the second source route, that you have to
>> pair the relays so that a given band will be using to identical relays,
>> (same close/open characteristics and current consumption).
>> 
>> Several years ago, while I still owner my Paragon, I had to go that route,
>> and Paul at TT stressed the point to me (was also very helpful with
>> obtaining alternative relays)
>> 
>> --
>> Vy 73 de OZ1PIF/5Q2M, Peter
>> 
>> ******************************************
>> ** If it sounds too good to be true --  **
>> ** it is!                              **
>> ** If it sounds about right -- make    **
>> ** sure you can afford to be wrong!    **
>> **                                      **
>> **          -- Robert Heinlein:        **
>> **          "Time enough for love"    **
>> ******************************************
>> email: peter(no-spam filler)@frenning.dk
>> http://www.frenning.dk/oz1pif.htm
>> Ph. +45 4619 3239/ +45 2332 9464
>> Snailmail:
>> Peter Frenning
>> Ternevej 23
>> DK-4130 Viby Sj.
>> Denmark
>> ******************************************
>> 
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> 
> 
> 
> 
> -- 
> *Living one day at a time with Jesus as my Savior. But, still having Fun.*
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec