[TenTec] ORION ll to HERCULES ll

P C Andy Anderson xtraham58 at hotmail.com
Wed Aug 31 08:51:13 EDT 2016


Good morning Dave,

Thank you for the info on the cables. Will look for the numbers you sent. Looks like a work in progress to get the Herc in operation.

I would say that you are really interested in the shooting hobby. I am 73 and have 2 hand guns and several long guns. I just shoot for the fun of it.
 Tnx Agn,

Andy, W3LI

________________________________


Finally, a chance to dig in the cables

The cable from the Orion II is labeled

98547 Rev N/A
Sample
05/12/03


The cable to the Herc II has no label. The connector to the 311 is a DB-25. There is a short stub (approx. 6") with another DB-25 from that first connector. There is a longer cable with a connector that matches the Herc II. I would bet that this is the same cable that was used with the OMNI 6 Plus to the Herc II, but I cannot be sure of that. When I bought the 311, both cables came with it.

I hope this info is some help as the combination of rig and amp is a great one.

Yes, I am NRA certified as a range safety officer and a pistol instructor. At age 72, my hand is no longer as steady as I'd like and my groups are larger than I want. I shoot the Sig 320 full size in 9mm, A Remington R1 1911 enhanced in 45 ACP, a Glock 21 in 45ACP (don't like the trigger) and my favorites are all S&W revolvers. They include a 617 in 22LR, a 686 in 357 Mag and a 29 & 629, both in 44 Mag.

73
Dave
WA3F


----- Original Message -----

From: "P C Andy Anderson" <xtraham58 at hotmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Saturday, August 27, 2016 6:49:36 AM
Subject: Re: [TenTec] ORION ll to HERCULES ll

Dave, I do a little shooting myself, great fun. Are you a NRA instructor?

Do what you do, no hurry here.


Andy, W3LI


________________________________
From: TenTec <tentec-bounces at contesting.com> on behalf of d.e.warnick at comcast.net <d.e.warnick at comcast.net>
Sent: Saturday, August 27, 2016 6:16 AM
To: Reflector, TenTec
Subject: Re: [TenTec] ORION ll to HERCULES ll

Andy,
I work today & tomorrow, but will dig behind the rig as soon as possible to get the numbers off those cables. Today is a 12-hour day as a range safety officer at a shooting range & tomorrow I teach a pistol course for a local club. Long hours, but another of my passions.
I'll also dig to see if I have any manuals or info on the 311.
73
Dave
WA3F

----- Original Message -----

From: "P C Andy Anderson" <xtraham58 at hotmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Friday, August 26, 2016 4:20:22 PM
Subject: Re: [TenTec] ORION ll to HERCULES ll

Hello Dave, Tnx for the info on the 311 box. Hope I can find one. I will continue to look for cables. I know that I can make them if I had the part numbers for the connectors. Were there any part numbers on the cables you bought?


You must know my good friend Jay Rodaman K2TTT. I Lived in NJ 30 yrs ago and met Jay at the Splitrock club. He has been doing my taxes ever since. I do use the FRC cluster.


Tnx agn, if you find anything I need let me know pse.


73's Andy, W3LI AKA Phil


________________________________


Andy,
I'm using the Orion II, Hercules II & 311 interface. Works great & I love it.
The 311 & cables are hard to find used. Set me back $110, but well worth it
73
Dave
WA3F

p.s. I can work any DXpedition & am part of the FRC contest Club. Running the Herc II at 450 watts is all that's necessary for success.
I'd love to see an Orion III & Herc III solid state full legal combo come out of the new TenTec

----- Original Message -----

From: "P C Andy Anderson" <xtraham58 at hotmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Friday, August 26, 2016 6:03:08 AM
Subject: [TenTec] ORION ll to HERCULES ll

Hi folks,

Recently purchased an TT Hercules ll Amp. Now I need some help and or suggestions.

Has anyone ever married the Oll to the Hercules ll amp using the band data switching so that the amp will follow the Oll band.

I know that TT had a 311 box for the Orion, but not the Oll.

The Herc manual is not to informative.


TNX, Andy, W3LI
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
TenTec Info Page - Contesting<http://lists.contesting.com/mailman/listinfo/tentec>
lists.contesting.com
Welcome to the Ten-Tec mailing list! This list is intended for the exchange of information on Ten-Tec-related topics ONLY. Off Topic subject postings should be ...



TenTec Info Page - Contesting<http://lists.contesting.com/mailman/listinfo/tentec>
lists.contesting.com
Welcome to the Ten-Tec mailing list! This list is intended for the exchange of information on Ten-Tec-related topics ONLY. Off Topic subject postings should be ...



TenTec Info Page - Contesting<http://lists.contesting.com/mailman/listinfo/tentec>
lists.contesting.com
Welcome to the Ten-Tec mailing list! This list is intended for the exchange of information on Ten-Tec-related topics ONLY. Off Topic subject postings should be ...




_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


More information about the TenTec mailing list