[TenTec] Panadapter with 9MHz i.f.
barry.n1eu at gmail.com
Sun Dec 25 13:22:01 EST 2016
I posted a Web page with all the panadapter info including photos of the
buffer amp mod in the Omni 6+: http://omni6.wikidot.com/panadapt
73 & Happy Holidays,
On Sat, Dec 24, 2016 at 7:38 PM, Barry N1EU <barry.n1eu at gmail.com> wrote:
> Thanks Steve. I'm finding that I can use 9.000MHz for i.f., cw offset is
> equal to (minus) sidetone frequency, USB offset is -3000Hz and LSB offset
> is zero.
> Yes, I'm using OmniRig to interface to the Omni 6+.
> HDSDR software has a neat "Mirror RF Spectrum in general" checkbox that
> makes the spectrum move correctly with the Omni 6/SDRPlay combo. Back when
> I used an Orion/LP-Pan, I never saw the flipped spectrum issue.
> 73, Barry N1EU
> On Sat, Dec 24, 2016 at 7:21 PM, Steve Ellington <steven4lq at gmail.com>
>> I fiddled with this on a Corsair II. The offset for it was 750 Hz for cw
>> but on the O6 it would depend on your sidetone frequency setting. I would
>> guess 1500 Hz for SSB +/-. I lost interest because it tuned backwards.
>> IOW.... tuning up the band caused the signals to move down. It's an (IF)
>> I would think OmniRig would be needed to interface the rig to SDR-C but I
>> used HDSDR. It can operate OmniRig which in turn operates most any rig via
>> serial port.
>> Let us know how it goes.
>> Steve N4LQ
>> On Sat, Dec 24, 2016 at 1:48 PM, Barry N1EU <barry.n1eu at gmail.com> wrote:
>> > Can anybody please provide the correct freq settings to use with
>> > software being driven off the 9MHz i.f. output:
>> > IF OUTPUT 9.???.??? MHz
>> > Offsets CW ??? Hz
>> > LSB ??? Hz
>> > USB ??? Hz
>> > FWIW, I'm driving an SDRPlay RSP1 off my Omni 6+ 9MHz i.f. through a
>> > Clifton Labs Z10000B buffer amp. I'm using SDR Console v3 software.
>> > looks like it's going to be a very cool setup. I am fully documenting
>> > install.
>> > Thanks & 73,
>> > Barry N1EU
>> > _______________________________________________
>> > TenTec mailing list
>> > TenTec at contesting.com
>> > http://lists.contesting.com/mailman/listinfo/tentec
>> TenTec mailing list
>> TenTec at contesting.com
More information about the TenTec