[TenTec] Question about Omni VI Plus ALC

[Jim Goudie]

Now you're beyond my experience.  I don't operate SSB much at all.  (Sorry for assuming you were talking about cw.)

Jim, AF3Z


On Feb 3, 2016, at 9:26 PM, George Robbins wrote:

> Jim this was on USB and it happens with the processor off and mic gain set to 0. If you increase the power above 10 or 15 watts the light does not come on when keyed. It's only on low power. Everything appears to be working and i get good signal and audio reports but I was just curious about this.