[TenTec] service/repair ?

John Bescher n4dxi at aol.com
Tue Jul 19 12:26:54 EDT 2016


I sent my Orion 2 for repairs to Tentec last month with mixed feelings about how long repairs would take.  To my surprise and delight, the rig was sent back, successfully repaired, in a week, battery and capacitors replaced.


John Bescher, N4DXI



-----Original Message-----
From: Kartooo <kartooo at comcast.net>
To: tentec <tentec at contesting.com>
Sent: Tue, Jul 19, 2016 12:23 pm
Subject: [TenTec] service/repair ?

been a member off and on here through out the yrs, owned many a ten tec rig and send a few in for repair. 
has anyone sent their radio in for repair lately ? 


i shipped my omni VII down there yesterday and i'm hoping for a positive turnout. 
the mic amp board was doing funny stuff, a bunch of loud static and humming whenever the mic cable was disturbed. 
any mic, any cable on TX ssb. even when keyed by the KEY. just kept getting worse 
i removed the case, 4 screws on the face, moved the face fwd just a bit to take the 3 screws that retain the mic amp board to the face and saw nothing...... 
re soldered all 8 mic pins, no luck 

searched the board over with a 10X lens. did this routine 4X's and could not find a thing. 
gave in and wrote ten tec, took about 3 weeks for this reply: 

Our service policy is there will be a one hour minimum charge of $140.00 dollars for each transceiver or equipment sent in for repair. If more than one hour is needed to make the repair then additional charges of $125.00 dollars per 
hour for each hour needed to make the repair. Any parts used for the repair and return shipping are additional charges. Turn-around time on repairs have been 
two to three weeks 
keeping my fingers crossed, should be in TN on thurs. 
Larry 
n1yw 




_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



More information about the TenTec mailing list