[TenTec] Omni Series Panel and Trim Ring

[k7mks at comcast.net]

Mike: I've removed those two screws and the trim ring is still hung up on something and will not release from the panel. Have you removed a trim ring by just removing those 2 screws and how did you do it? 
Joe 



----- Original Message -----

From: "Mike Bryce" <prosolar at sssnet.com> 
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com> 
Sent: Friday, June 3, 2016 10:24:48 PM 
Subject: Re: [TenTec] Omni Series Panel and Trim Ring 

joe, 

the trim ring comes off by two screws on the bottom, directly under the vfo knob 

mike 

Mike, WB8VGE 
SunLight Energy Systems 
The Heathkit Shop 
http://www.theheathkitshop.com/ <http://www.theheathkitshop.com/> 
J e e p 
o|||||||o 

A man with one clock knows what time it is. A man with two clocks is never sure. 



> On Jun 3, 2016, at 11:11 PM, k7mks at comcast.net wrote: 
> 
> Starting to restore an Omni D Series B and have a need for a cosmetically nice front panel or a method to redo some letters or numerals that closely match the original. 
> 
> A previous owner went wild with an engraving tool on the trim ring and my options are to find a parts rig for a trim ring 
> or to find some way to sand and fill the groves he cut and then repaint the trim ring. BTW - how do you get the trim piece removed. 
> 
> Many thanks joe k7mks 
> _______________________________________________ 
> TenTec mailing list 
> TenTec at contesting.com 
> http://lists.contesting.com/mailman/listinfo/tentec 
> 

_______________________________________________ 
TenTec mailing list 
TenTec at contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec