[TenTec] Knob for 229A Tuner

[Al Gulseth]

Simpler than that - just take a small section of a piece of 1/8" or so ty-wrap 
and wedge it into the gap opposite the side where the set screw is. I've 
successfully rescued several of said knobs that way.

73, Al

On Sat March 12 2016 10:33:33 am Clayton Brantley via TenTec wrote:
> Gary:  Your friendly TenTec parts supplier in Myrtle Beach has one.  It
> came in error.I was wanting the large cap knob.  If your knob is split
> where it contacts the shaft, thereis a fix.  You need a small wire from one
> of the ties that are on the end of a loaf of breadand tightly wrap and tie
> it in the recess of the knob.  Then fill that recess with epoxy andthe knob
> is good to go and better than new.  The knob maker was trying to save a
> pennyon the knobs by leaving that material out and therefore making the
> knob prone to breakage.I have used that fix on several TenTec knobs and
> have not had a failure. 
>
> I'll sell you a new knob if that's what you want.  Can't remember what they
> cost but ...I have your address and can get it out. Clayton N4EV
>
>
>
>       From: "Gary H. Harmon, Jr." <gharmon at idworld.net>
>  To: TEN-TEC List <tentec at contesting.com>;
> ten_tec_radio_net at yahoogroups.com Sent: Saturday, March 12, 2016 11:02 AM
>  Subject: [TenTec] Knob for 229A Tuner
>
> Does anyone have any extra Ten Tec knobs?  I need one for the bypass
> switch.
>
>
>
>
> Appreciate any help.
>
>
>
> 73,
>
>
>
> Gary H. Harmon, Jr. - K5JWK - HAM Radio and ATARI Archaeologist
>
> 6003 Archwood
>
> San Antonio, TX 78239-1504
>
> 210.657.1549 h / 210.884.6926 c/t
>
> 210.657.1549 fax with prior notification
>
> gharmon at idworld.net
>
>
>
> "Too many projects - Not enough time!"
>
> "Retirement = Every day is a Saturday except Sunday"
>
> http://www.grissomroadcoc.org
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec