[TenTec] Anyone parting out Omni A/B/C/D (545/546) rigs?

[Mike Bryce]

Al,

I don't have a board, but might have a new chip. 

If you have the ic , but don't want to mess with it, I'll replace the chip for free. I have all the tools here. 

Mike wb8vge

Sent from my iPad

Knowledge is knowing a tomato is a fruit; Wisdom is not putting it in a fruit salad.
 

> On May 24, 2016, at 7:01 PM, Al Gulseth <wb5jnc at centurytel.net> wrote:
> 
> I picked up an Omni A series B from a SK estate recently. In doing some 
> preliminary tests for a no audio output issue it appears the LM380 on the 
> 80447 Audio-Sidetone board may have gone kaput. I think there may be a 
> spare '380 floating around in the parts collection, but the way the IC mounts 
> with the heatsink soldered to the middle set of ground pins it could be a bit 
> tedious to change. So, before I tear into it, does anyone have a known good 
> 80477 board they'd be willing to part with for less than an arm and a leg?
> 
> TNX/73, Al
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>