[TenTec] Omni D quits after 60-90 minutes

[Karl Schwab]

I have never had that problem, Tom with my old Omni-D; and I got it used many years ago!  Guys on this thread will help you solve the problem.  Let us know your results.  Karl, KO8S 

    On Wednesday, April 12, 2017 7:50 PM, "tfr001 at myfairpoint.net" <tfr001 at myfairpoint.net> wrote:
 

 Hi all,

I'm curious if any of you have had this same problem. When my Omni D was new (to me - bought it used) it would die after about 1 hour. By "die", I mean it would go pretty deaf and the transmit output would go nearly to zero. I fixed it by opening it up, reseating every circuit board, and tightening up all of the ground lugs I could find. That was about 3 months ago. It has now started to do it again. I'm interested to know if anyone solved it once and for all.  Meanwhile, I can go do the reseating shuffle again. It's a bit of a pain to troubleshoot, because it's difficult to get it to occur with the covers off the rig - apparently heat sensitive.

-Tom N1OOQ
 
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec