[TenTec] Blown Up Centurion

[Jeffrey Stricker]

First, make sure all filter caps are discharged. Next I would check all 
HV rectifier diodes ... then we'll see where we go from there.

On 9/2/2017 1:35 AM, Michael C. Marx wrote:
> 	
> 		
> 		
> 	
> 		
> 		Well I was using my Centurion tonight in the CW Open.  All was fine until ....BANG!  When I went to test it later, there was no plate voltage. I don't see anything obvious.  I pulled the tubas and still no plate voltage.  Testing the secondary of the power transformer showed 50 ohms across the secondary and 1 megohm plus from either end to ground. I haven't tested further.  Anybody have any suggestions?
> 73 Mike WB0SND
> 		
>
> 		Get Outlook for iOS
> 	
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

--