[TenTec] Ten Tec Omni VI Plus

[Paul Ceglia]

DEOXIT WORKS THE BEST ,IMO



-----Original Message-----
From: Bob McGraw K4TAX <rmcgraw at blomand.net>
To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Sent: Tue, Aug 21, 2018 1:31 pm
Subject: Re: [TenTec] Ten Tec Omni VI Plus

Rich

My general suggestion for older radios such as yours is to clean all internal connectors.  Apply contact cleaner to a Q-Tip or lint free swab and clean the male pins of each connector.  Do this one connector at a time, being careful to correctly reseat each connector.  I don't suggest spraying anything into the female pins. The clean male pins will provide suitable wiping action. 

Bob, K4TAX


Sent from my iPhone

> On Aug 21, 2018, at 10:28 AM, Richard Mortimore <richard at gw4bvj.com> wrote:
> 
> Hi All
> 
> 
> 
> My Omni VI Plus stopped working on 10m the other day with no RF on receive
> and no transmit power, all other bands were fine.  Today there is no RF
> received on any of the bands and although the ALC light goes green there is
> no RF power transmitted.  The signal meter isn't working at all. 
> 
> 
> 
> I've tried another PSU and same problem, I have left it on for 5 minutes but
> it doesn't spring into action. Any pointers would be appreciated.
> 
> 
> 
> 73 Rich GW4BVJ
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec