[TenTec] Omni 6+ for sale (from last production run)

[Barry N1EU]

The Omni 6+ has been sold.

All the filters, power supply, etc are available.  I will post details &
prices soon.

73, Barry N1EU

On Sun, Feb 4, 2018 at 4:00 PM, Barry N1EU <barry.n1eu at gmail.com> wrote:

> My Omni 6+ is looking for a new home.  This truly exceptional, one of a
> kind, radio has one minor issue that will need to be addressed by the new
> owner.  The receive signal has an intermittent slight loss in signal
> strength.  I know the issue lies somewhere after the front end board
> because it does not occur on the 9MHz IF signal.  So the new owner should
> be prepared to do a little troubleshooting.
>
>
> Now for the good news about this radio.  It is from the VERY LAST
> production run, serial number 08C10011 and is cosmetically in mint
> condition.
>
>
>
> Other features:
>
> 1.       optional trim ring has been added to the tuning knob
>
> 2.       9Mhz IF output has been added using Clifton Labs buffer board
> (see http://omni6.wikidot.com/panadapt) - I've used it with an SDRplay
> RSP1 (available with rig)
>
> 3.       Inrad Audio mod installed
>
> 4.       A DSP Bypass Mod (custom designed PCB) for full fidelity ssb rx
> audio has been installed (see http://omni6.wikidot.com/rxaudio) but is
> easily reversed/removed if desired.
>
>
>
> Optional filters available with rig:
>
> 1.       Inrad Roofing Filter Mod with  #765 600hz filter
>
> 2.       Inrad #754 2800hz 9MHz IF
>
> 3.       Inrad #753 400hz 9MHz If
>
> 4.       Ten-Tec #221 250hz 9MHz IF (for 500hz sidetone – this filter is
> VERY rare)
>
> 5.       Inrad #755 2800hz 6.3MHz IF
>
> 6.       Inrad #757 2400hz 10-pole 6.3MHz IF
>
> 7.       Inrad #758 2100hz 6.3MHz IF
>
> 8.       Inrad #750 400hz 6.3MHz IF
>
> 9.       Inrad #751 250hz 6.3MHz IF
>
> A very late production, mint condition 962 power supply is also available;
> also a nice 705 microphone.  The Omni 6+ comes in an original factory
> shipping box with original manual.
>
> Please email me directly if you are seriously interested in purchasing the
> radio and troubleshooting/repairing the rx issue.  The filters etc will
> not be sold until after the radio is sold so please don’t email me about
> them.
>
>
> 73, Barry N1EU
>