[TenTec] Omni - C Finals

[Shawn Upton]

A final can blow and let the driver do the tx, albeit at a low power. I would use a wattmeter on CW first, see if it is the final or perhaps a bad mic connection. 
Might want to reseat any modules and connectors, maybe one has some resistance.

shawn kb1ckt 
 
  On Sun, Feb 11, 2018 at 1:21 PM, Michael Goins<wmgoins at gmail.com> wrote:   Bill,

Have you run the rig into a dummy load to check the power out? That's the
first thing I'd do. Check it with a 50 ohm load.

mike, k5wmg