[TenTec] Pegasus no Transmit

[Joe Word]

Gary,

It is the same on all bands.

I hear a tink sound when I unkey, but no sound when I key. Is the
relay on the filter board,

yellow about 1 inch long?


Joe  N9VX

-------------------------------------------------------------

Is it the same on all  bands?

When going to TX, do you hear the antenna relay clicking? (Listen very closely
as this radio’s really is very quiet.)

I have seen the coils go open on the reed relays TT used for antenna switching.

Gary

W0DVN


On Wed, Oct 10, 2018 at 2:41 PM Joe Word <n9vx.joe at gmail.com> wrote:

> My Pegasus has no transmit output.
> > Receive works fine.
> > No output on any band on CW or SSB.
> > Red TX light comes on.
> > It does draw power supply current changing with power setting.
> > SSB TX sounds good in monitor.
> > Has LDG tuner, no change if bypassed.
> > Running Ten-Tec software.
> > I have unplugged, cleaned and reconnect connectors,
> > I see no physical component damage.
>
> Any thoughts?
>
> Joe  N9VX
>
>
> --
> I'd rather *talk* than* type*.
>


-- 
I'd rather *talk* than* type*.