[TenTec] OMNI VII

[Bob McGraw K4TAX]

Well my general and first approach is a Master Reset which you've done.  
The next suggestion is  clean all connectors inside the radio.

Do so one connector at a time, unplug the connector/cable, apply contact 
cleaner to a Q-Tip and scrub the male pins.  Then plug the connector on 
and off a couple of times to wipe the female contacts.  Do this one 
cable end at a time until all are done.

 >>>>  NEVER spray anything into the radio. <<<<

If this doesn't work, you may have a bad display or display driver.   
Thus contact Tentec by e-mail;   SERVICE at TENTEC.COM. Let them know what 
model radio and what problem you are having. They will likely suggest it 
being sent to them for repair.

73

Bob, K4TAX



On 10/13/2018 2:17 PM, Michael Goins wrote:
> Needing help, please.
>
> The Omni here is very new to me and I'm having a display issue.
>
> Tried a master reset and still have pixelation/fuzzy issues with the
> display on the Omni here. If this has happened to anyone else, please let's
> talk. New to me and sees to work fine - make contacts, great audio, etc. -
> just almost unreadable.
>
> Photo s too large for here. Will send to anyone who can maybe help. Thanks.
>
> Mike, k5wmg
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>