[TenTec] Orion I

[MadScientist]

First thing is to do a hard reset.

Then replace all of the capacitors on the A9 board. 

When those caps fail, they cause all sorts of odd problems.

Gary

> On Apr 30, 2019, at 9:09 PM, Byron Cordes via TenTec <tentec at contesting.com> wrote:
> 
> Hello everyone. 
> I have a Orion that has a tx audio problem. 4 pin Mic 
> Key mic and I get a pulsating sound , the alc flashes with the sound. If I turn down mic gain to under 10 pulse  slows down and is weaker alc light.  Have unplugged mic and grounded pins 3 still the same .Any ideas? 
> Thanks Byron AC9PA 
> 
> Sent from my iPad
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec