[TenTec] Orion I

[Byron Cordes]

Hard reset done. Caps where replace 6 months ago but they could go bad again . I’ll order some tomorrow ,probably won’t hurt to get a few sets to keep on hand .
 Thanks 

Sent from my iPad

> On Apr 30, 2019, at 9:43 PM, MadScientist <dukeshifi at comcast.net> wrote:
> 
> First thing is to do a hard reset.
> 
> Then replace all of the capacitors on the A9 board. 
> 
> When those caps fail, they cause all sorts of odd problems.
> 
> Gary
> 
>> On Apr 30, 2019, at 9:09 PM, Byron Cordes via TenTec <tentec at contesting.com> wrote:
>> 
>> Hello everyone. 
>> I have a Orion that has a tx audio problem. 4 pin Mic 
>> Key mic and I get a pulsating sound , the alc flashes with the sound. If I turn down mic gain to under 10 pulse  slows down and is weaker alc light.  Have unplugged mic and grounded pins 3 still the same .Any ideas? 
>> Thanks Byron AC9PA 
>> 
>> Sent from my iPad
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>