[TenTec] Omni VI+ LPF Board Relays Buzzing

[Peter Bertini]

Buzzing relays sounds like a problem on the processor board. But, I'd
reseat all of the connectors associated with the band pass board first. As
I recall, that starts on the micoprocessor board, and goes through the
receiver bandpass board as well where some diode steering is done for the
band ranges.

At the very least, I would want to scope the band signals to see where the
issue originates.  Shotgunning the relays is not a good plan, and they do
not fail in that manner.

Pete