[TenTec] Friend in NC has Omni VI trouble

[Ken Brown]

What about RX function in LSB mode? In Omni VI CW RX is LSB and CW and LSB
use the same crystal in the BFO. Failed crystal perhaps?

DE N6KB

On Mon, Jun 17, 2019 at 2:30 AM Michael Rutkaus <mrutkaus at gmail.com> wrote:

> Rig has no audio output in CW mode, appears to put out signal but no signal
> is heard. Does this even with key plug removed.
>
> While this is happening, if he switches to USB, rig seems to work, ie he
> could hear me on sked this morning in the USB position but couldn't
> actually copy.
>
> Numerous basic tests have been done. Thinking it a relay )as once it did
> work ok after this occurred, but no longer) I asked him to drop it from a
> couple inches to the table! No luck.
>
> Writing this I realize I haven't asked him if it works ok in USB mode. but
> apparently it might.
>
> Any ideas?
>
> thanks
>
> Mike
> K4QET
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>