[TenTec] Got Caps/Thanks Mike, and others for help

rfulco at suddenlink.net rfulco at suddenlink.net
Thu Dec 31 20:22:56 EST 2020


Well, I finally pieced to gether the 22mf, and others from 2 sources. With 3" of rain hitting N. La mail is slow today!...Plan to tear into it this evening. I do have a couple of spare caps now on hand...Thanks to all ..Randy K5SL

---- Mike Fonda via TenTec <tentec at contesting.com> wrote: 
>  Randy,
I had about the same problem with my Orion II.  Looked at the pwr board and immediately noted one of the 470uf caps was bulging.  No luck with Mouser, but I was able to get the equivalent from Lead Electronics in NY.  The two that are side by side were a tight fit, but all worked well, and the Orion runs like a new one.
Lead Electronics315 668 6060
UPW1H471MHD (ESRL50V470-RC)12.5mmX20mm L/S=5.0 mm 105 deg470uf 50v radial leads lesrAlum electro'tc cap

It took a week to get them, but the fault was with the post office/heavy holiday traffic.
Maybe this will help?
Mike WA6JJM
PS  It was a pain to get the solder out of the holes.  I finally used a sewing needle along side the soldering iron to poke the solder out of the board.  
 

    On Wednesday, December 30, 2020, 11:50:23 AM PST, <rfulco at suddenlink.net> wrote:  
 
 My Orion finally would not come up Sunday when turned on, hear relays clicks, but display never comes up, and rig won't boot.  I tried to order these caps from Mouser and Allied today and back ordered till end Jan. 

They are C1,C8 Panasonic Alum Electolytic Leaded 100uf 50wvdc, 108C  ($.22 ea)
      and  C6,C7 Panasonic Alum Electrolytic Leaded 470uf, 50wvdc, 108C ($.69ea)

Ordered C2,C3,C4,C5

If I am going to troubleshoot problem-figure I wud replace the known problem  Caps in Distribution board. 

Anyone have any spares on hand, so I don't have to wait. 


Randy K5SL


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
  
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec




More information about the TenTec mailing list