[TenTec] Eagle: deaf receiver until a brief transmission is initiated

[Carlos PECO BERROCAL]

Thanks Bob, much appreciated.


Carlos VK1EA



On Sat, May 16, 2020 at 1:09 PM Bob McGraw K4TAX <rmcgraw at blomand.net>
wrote:

> Sounds like the TR relay.   It is a sealed relay,  mounted on a small PC
> board just behind the aluminum cross member.   Usually supported on wire
> legs in order to reduce the sound of the relay operating.
>
> Be sure the voltage at the radio is 13.8 to 14.8 volts.    Also be sure
> the ground terminal on the radio is connected direct to the ground
> terminal on the power supply.
>
> 73
>
> Bob, K4TAX
>
> On 5/15/2020 7:11 PM, Carlos PECO BERROCAL wrote:
> > Hi,
> >
> > I have been away from the hobby since July due to some serious work and
> > family commitments but I'm getting back to my radios (finally !)
> >
> > So I have this Eagle that, every now and then, has very little
> sensitivity
> > when you switch it ON. It happens like one in 15 times. You activate the
> > transmission briefly (pressing the PTT or the "TUNE" button) and
> everything
> > goes back to normal for days.
> >
> > Have you guys experienced something like this?
> >
> > Other than that, the radio is a pleasure to listen to.
> >
> > 73,
> > Carlos VK1EA
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>