[TenTec] Missing Century/21 PTO parts help

[David Goncalves]

I suppose that’s true - given the repair kit was general over that 70s/80s
vintage stuff. My rig is the analog version, btw. Wouldnt it be nice if
there was a DDS replacement that could handle the old analog dial?

On Tue, Oct 6, 2020 at 1:51 PM Mike Bryce <prosolar at sssnet.com> wrote:

> I’ve always wanted to put in one of those DDS VFOs that run on 5.0 to 5.5
> mhz. would make for an interesting project.
> there’s plenty of room behind the dial for an encoder. The only issue
> would be sometype of digital display (a Chinese digital dial comes to mind)
> to replace the analog dial
> ( you didn’t say if the C21 was digital or not)
>
> Ten Tec used the basic PTO though out, there maybe one or that that were
> very model specific, but I’d guess to wager a PTO from  triton 4, Omni A, B
> or C might work, too. But that’s only my guess
>
> mike, wb8vge
> “The trouble with quotes on the Internet is that you never  know if they
> are genuine”
>
> —Abraham Lincoln
>
> > On Oct 6, 2020, at 1:24 PM, David Goncalves <davegoncalves at gmail.com>
> wrote:
> >
> > I’m was trying to restore a really rough Century/21, but have already run
> > into a snag. It appears somebody has worked on the PTO and left parts
> out.
> > I’m missing the wedge (90254), one of the washers (51006) and the pistol
> > (80263P) and pin (38025)  are damaged. This looks bad enough to consider
> > junking, given how bad other parts are on the rig. Perhaps somebody has a
> > failed Century/21 on the list in good mechanical order, or these parts to
> > spare?
> >
> > Thanks,
> >
> > David Goncalves
> > W1EUJ
> > --
> > David Goncalves
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
-- 
David Goncalves