[TenTec] OMNI VI plus

[jbrannig]

All external connectors and cables are OKThe PA is not drawing current in XMIT.Tnx,JimSent from my Galaxy Tab® A
-------- Original message --------From: Barry Simpson <vk2bj at optusnet.com.au> Date: 9/29/20  10:12 PM  (GMT-05:00) To: Discussion of Ten-Tec Equipment <tentec at contesting.com> Cc: jbrannig <jbrannig at verizon.net> Subject: Re: [TenTec] OMNI VI plus I have seen the various replies to your request for help but I think weneed a bit more information from you.You say that there is no RF out on transmit. Is the PA actually drawingsome current on transmit ?If so, and given the sudden nature of the problem affecting receive andtransmit, I would suspect that it is something external to the rig.Something very simple such as the failure of the PL259 plug in the antennasocket of the rig - either not making proper contact or the centreconductor of the co-ax has broken.Have you considered and investigated an external cause ?Barry Simpson  VK2BJOn Wed, 30 Sep 2020 at 09:37, jbrannig via TenTec <tentec at contesting.com>wrote:> My OMNI died suddenly.No signals on receive and no RF out on> transmitEverything else functions as normal..ie. frequency read out, audio> noise, bandchange...Any ideas on where to start looking?Tnx es 73JimSent> from my Galaxy Tab® A> null> _______________________________________________> TenTec mailing list> TenTec at contesting.com> http://lists.contesting.com/mailman/listinfo/tentec>_______________________________________________TenTec mailing listTenTec at contesting.comhttp://lists.contesting.com/mailman/listinfo/tentec