[TenTec] Two topics: Tentec Eagle I2C Clock speed. Multi control erratic.

[Carlos PECO BERROCAL]

Hi Bob,

I would wire the encoder from radio B into radio A, without taking anything
out of the radios (just fitting some short cables in between the two).
Would it be possible to do that ?

73,
Carlos VK1EA



On Thursday, February 4, 2021, Bob D. <ajamas.rn at gmail.com> wrote:

> 1. Does anyone know the I2C clock speed in the Eagle 599.
>
> 2. I have two and a half Eagles. One of the two complete Eagles is
> misbehaving with regard to the multi-control.
> I don't want to replace the control if the problem is elsewhere.
> The symptom: Select something like CW speed or Power. Turn the
> multi-control. The indicated value jumps around. If I turn CCW it generally
> decreases but with jumps to higher and lower values. If I turn CW, it
> generally increases but with jumps to lower and higher values. I'm thinking
> it could be a problem with the control, signal levels, noise on the lines,
> ???
>
> What say?
>
> 73, -bob ah7i
>
>
> --
> -do not look into LASER with remaining eye!
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>