[TenTec] Two topics: Tentec Eagle I2C Clock speed. Multi control erratic.
Carlos PECO BERROCAL
carlos.peco at gmail.com
Wed Feb 3 18:34:24 EST 2021
I can make some captures on the I2C bus but not until the 20th or so (busy
weekends at the moment).
On Thursday, February 4, 2021, Bob D. <ajamas.rn at gmail.com> wrote:
> 1. Does anyone know the I2C clock speed in the Eagle 599.
> 2. I have two and a half Eagles. One of the two complete Eagles is
> misbehaving with regard to the multi-control.
> I don't want to replace the control if the problem is elsewhere.
> The symptom: Select something like CW speed or Power. Turn the
> multi-control. The indicated value jumps around. If I turn CCW it generally
> decreases but with jumps to higher and lower values. If I turn CW, it
> generally increases but with jumps to lower and higher values. I'm thinking
> it could be a problem with the control, signal levels, noise on the lines,
> What say?
> 73, -bob ah7i
> -do not look into LASER with remaining eye!
> TenTec mailing list
> TenTec at contesting.com
More information about the TenTec