[TenTec] Ten Tec Argo V repair

Rick Cochran wo8l at aol.com
Tue Jan 26 22:10:40 EST 2021

Maybe signed a non compete agreement at some point with one of the several purchasers.


Sent from my iPhone

> On Jan 26, 2021, at 10:05 PM, Bob, WB2VUF via TenTec <tentec at contesting.com> wrote:
> I suspect that most of the Sevierville employees are gone; retired, laid off or quit.  Dishtronix appears to be focused on their own products and Ten Tec government and commercial products.  Also,  Ten Tec was shut down by Covid restrictions.
> I've been able to repair Paragons (mine and a friend's).  A rig like that can eat up many troubleshooting hours, so to pay someone to fix it  would be cost prohibitive.  The other big  limitation is parts obsolescence.   If a processor or memory chip goes, the rig is finished, unless one can find a parts rig.
> That's why it's important to have at least one truly vintage rig in the shack, like my Heath HW-100.  I can still get tubes, generic transistors, resistors and capacitors.
> 73,
> Bob WB2VUF
>> On 1/26/2021 3:08 PM, Bernie Skoch via TenTec wrote:
>> I recently had an Orion II in to Ten-Tec for repair on a problem that was just beyond me to fix.
>> Service  was good, reasonably priced, but slow.  The tech called me to get payment information and to my surprise told me it was only him there; he was the only one doing repairs.
>> I have no reason to doubt him, and that might at least partially explain some of their limitations.
>> There are plenty of independent amateur radio repair firms. Maybe one of these can help:
>> eHam.net
>> 73 and good luck.
>> Bernie
>> -----Original Message-----
>> From: Ed Lawson <elawson at grizzy.com>
>> To: tentec at contesting.com
>> Sent: Tue, Jan 26, 2021 1:46 pm
>> Subject: Re: [TenTec] Ten Tec Argo V repair
>> I guess it is important to keep in mind that the only value our radio
>> toys have is the enjoyment of using them so better to use them up than
>> let them sit.  So no big deal once you get your fair value of use from
>> them if they cannot be repaired.
>> That said, seems one thing going for TenTec traditionally was their
>> service.  If loyal user is willing to pay to have them determine if a
>> rig is repairable and, if so, at what cost; then so long as they are
>> making money it would seem bad business to turn everyone out in
>> the cold.  I assume it is not a viable business practice or they really
>> do not want to support the ham gear anymore beyond whatever they now
>> produce and given what they produce and that does not seem a viable
>> business model either at this point.
> -- 
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

More information about the TenTec mailing list