[TenTec] Right Channel dead on Orion 2 phones
cw_de_n5op at sbcglobal.net
Thu Sep 23 18:47:20 EDT 2021
Excellent idea! I'll try that!
On 9/23/2021 5:11 PM, Bernie Skoch via TenTec wrote:
> I've had it happen when I have used a mediocre adapter to take my 1/8" phones plug and adapt it to the 1/4" jack.
> Have you reversed the sources to see if the problem follows the source or the jack? (I _think_ you can do that...)
> Best of luck troubleshooting.
> Bernie K5XS
> -----Original Message-----
> From: Kim Elmore <cw_de_n5op at sbcglobal.net>
> To: tentec at contesting.com
> Sent: Thu, Sep 23, 2021 5:02 pm
> Subject: [TenTec] Right Channel dead on Orion 2 phones
> Has anyone seen this happen before? The right channel on the stereo
> phone output jaclk appears to be dead. Not a sound on the right side.
> Yet, on speaker I hear what should come put of the right channel without
> a problem. So, there appears to be audio from the source I'm routing to
> the right channel (the RX-366 audio). I've done a couple of master
> resets to no avail, though I will add that initially today the RX-366
> seemed dead but after a rest, it's happy again.
> Kim N5OP
Kim Elmore, Ph
Kim Elmore, Ph.D. (Adj. Assoc. Prof., OU School of Meteorology, CCM, PP
SEL/MEL/Glider, UAS, N5OP, 2nd Class Radiotelegraph, GROL)
/“I occasionally play works by contemporary composers and for two
reasons. First to discourage the composer from writing any more and
secondly to remind myself how much I appreciate Beethoven." – Jascha
More information about the TenTec