Topband: Ladder Line Beverage?

[Barry N1EU]

I've heard it mentioned a couple of times by guys on the reflector and ON4UN 
briefly alludes to constructing a 2 wire Beverage using 450 ohm transmission 
line (pp 7-22 and 7-23 of his book).  I thought this might make installation 
a lot easier if I could scrounge up the wire.  If there is a technical down 
side to using such closely spaced conductors, I'd appreciate hearing from 
any knowledgable folks.

Tnx & 73,
Barry  N1EU

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com


--
FAQ on WWW:               http://www.contesting.com/topband.html
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com