Topband: Wideband Noise on 160

Eric Scace K3NA eric@k3na.org
Thu, 28 Dec 2000 18:04:23 -0500


   An easier solution to identifying noise sources in the house:

a) Go to the main circuit breaker panel in your house, and turn off everything
except the feed to the shack.  See if any noise>sources go away.  (If you have
a receiver which can run off battery, turn off the shack too.)

b) Turn on breakers individually (#1 on, then off... then #2 on, then off... 
etc) to see what noise sources re-appear with each breaker.  That will give
you a good clue as to where the offending device is located.

c) After you've determined which parts of the house have QRN-generators, you
can start pulling plugs on stuff individually in just that sector of the
house.

-- Eric K3NA


--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com