Topband: Feedlines

[Bill Hohnstein]

I've generally use flooded cables for my Beverages.  While an occasional
critter may take a quick bite, I haven't seen one continue for a meal.  The
cable flooding prevents water from future rains from significantly wicking
in and the ruining the cable via causing high attention.  Plus, it "prevents water 
migration by using a customized polymer adhesive over the center conductor."  
"Protection against moisture ingress and other underground contaminants is 
assured by using a  unique highly flexible polyethylene jacket on all 
underground products."                                    
Hopefully I'm not out of place here, but the quotes are from CommScope's
description of some of their flooded cables.  I have some shorter pieces
(generally under 200 feet--that's short for me) of their F5967BEF cable
(see: http://www.commscope.com/pdf_files/Drop/F5967BEF.pdf ) for
7 cents a foot.  This is new flooded RG59 cable.  I use three pieces of 
that (around 770 feet long each) for my three parallel phased European
Beverages (with only in-shack preamps sometimes used).  I was hoping
to offer 1000 ft rolls of this for $60 but my supplier just has very small
quantities on hand.  Flooded RG6 has better availability.   F660BEF is
$98/1000' (see http://www.commscope.com/pdf_files/Drop/F660BEF.pdf )
Flooded dual RG6 with ground wire (which could be used for preamp
voltage or Beverage switching) is #5789 for $190/1000' (see
http://www.commscope.com/pdf_files/Coax/5789.pdf ).  Adding chokes 
around the coax is more of a problem with this though.  Drop shipping 
could lower the price some.  Contact me direct if  you have any interest.
This isn't a get rich scheme on my part, just trying to help some without
easier access to flooded cable.

73,  Bill     K0HA


 



--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com