Topband: FT-1000D Diversity and the G3TKF Synchro Mod

k3ky@erols.com k3ky@erols.com
Sat, 23 Jun 2001 21:57:17 -0400


There is a simple mod applicable to the FT-1000 equipped with
the BPF-1 option, or to any FT-1000D, which allows the main
tuning knob to control both main and sub receiver frequencies
simultaneously. It requires little more than a DPDT 5V relay,
and can be done entirely 'no holes'. I would like to thank Robin,
G3TKF, for originating this very uesful circuit. Anyone interested
can find a fairly complete writeup of the mod in a 3-page series at:

http://www.angelfire.com/md/k3ky/page61.html

The last page, which may be of more general interest, describes
my early experiences using antenna diversity on all HF bands,
160-10 meters:

http://www.angelfire.com/md/k3ky/page63.html

Regarding the general subject of field modifications and Yaesu
'factory' service, I would like to hear from owners who have sent
radios with mods to Yaesu for service. I have heard accounts of
hams receiving their rigs back from Yaesu with all the non-
factory-originated mods pulled out. Is this accurate or not? Just
a minor concern to me, but I am curious. Please reply directly
to my email address and I will summarize answers received if
that is warranted.  

73, David K3KY


--
FAQ on WWW:               http://www.contesting.com/FAQ/topband
Submissions:              topband@contesting.com
Administrative requests:  topband-REQUEST@contesting.com
Problems:                 owner-topband@contesting.com