Topband: Wire antennas and antenna analyzers

Björn Mohr bm at
Fri Sep 29 09:39:31 EDT 2006

> I always short the connector on the coax before connecting 
> it to my AEA HF-CIA analyser.  An even better approach would 
> be to use a T-connector between the coax and the analyser with 
> the unused port shorted until the measurement is taken.
> Dave  AB7E

Dave, thanks for the great idea! I will use a T-connector with a shorted BNC
plug when connecting the antenna.

And thanks to everyone who contributed to the subject!

73 de Björn /SM0MDG

More information about the Topband mailing list