Topband: Antenna Noise canceller

[Gary and Kathleen Pearse]

One not too secret secret is to place the noise canceler inline with  
the receiver output/input jacks (if has them), instead of inline with  
the antenna in/out fitting on the radio...connect the receiver output  
jack to the noise canceler antenna jack, the noise canceler radio  
jack to the rig's receiver input jack, and add a properly polarized  
sense antenna to the noise canceler's auxiliary antenna fitting...no  
transmit RF through the noise canceler means no RF interference is  
created...hope this is of some help to those not familiar this  
approach which has been discussed by several others.

73 Gary NL7Y