Topband: Silver Plated Conductor

[GEORGE WALLNER]

Many thanks to those who have contributed ...

The consensus was clearly that silver plating would not 
make a practical difference below 30 MHz, at least in the 
short term.

In any case, I have moved forward and have completed the 
tuner, using the exising copper conductors, except for 
some of the lower inductance coils (used primarily above 
10 MHz), where I have replaced the 3 mm wire with 1/4" 
tubing.
No bling!

TKS for all the good advice and see you in the contest,

George
AA7JV