Topband: Termination resistor for 160-80- Pennant antenna (Receiveonly)

[Hardy Landskov]

I used 2--1800 ohm, 1 watt resistors in parallel. The resistance came out to 
be 920 ohms but close enough to see that the F/B ratio was 25 db or so.
73 Hardy N7RT

----- Original Message ----- 
From: <allan1 at dejazzd.com>
To: <topband at contesting.com>
Sent: Monday, September 05, 2011 9:50 AM
Subject: Topband: Termination resistor for 160-80- Pennant antenna 
(Receiveonly)


> The 160-80 pennant antenna calls for a 900 ohm termination resistor. 
> Since 900 is not a standard resistor value, what is the best way to 
> accomplish this?  Not enough room for a beverage at this qth!
>
> Thanks
>
> Allan W2TN
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK