Topband: Fixed capacitor source needed (150pf 5KV)

[Fortra]

Hi Herb,

same thing happened to me, and i have used Russian
doorknob capacitors very close in value ( i think i have combined
100 and 47 pf ). Try dr.Alex website for those...

A friend of mine, replaced ALL of the PCB capacitors and since that time
on, no problems...
Of course, do not push more then 1500 to 2000 watts at big mismatches :)

It is my favourite tuner,

Gl Nermin S58DX

----- Original Message ----- 
From: "Herb Schoenbohm" <herbs at vitelcom.net>
To: "TopBand List" <topband at contesting.com>; <towertalk at contesting.com>
Sent: Thursday, October 03, 2013 4:45 PM
Subject: Topband: Fixed capacitor source needed (150pf 5KV)


>I have a Drake MN2700 so I can at least get the amp to work above 
> 1870Khz during contests.  The tuner used some fixed flat 150pf 5KV 
> capacitors to switch in from the front selector as increased capacity is 
> need to make the tuner work.  I can't find any door knob substitutes at 
> that value in my junk box. I am thus looking for a source for these 
> values but so far have not found anything that I can use as a 
> substitute. I presume I could make some out of sections of RG-8 mini 
> roller up in a coIl but before I try this I am searching for a door knob 
> source.  I have some 500pf at 5KV and three of them in series might be 
> close enough but i still need the correct values.  If any reader to this 
> knows of other ATU manufactures that use the copper teflon flat 
> capacitor in their units maybe   could order 150 pf 5KV from them.
> 
> 
> Your help on this would be appreciated.
> 
> 
> Herb, KV4FZ
> _________________
> Topband Reflector
>