Topband: tool for install radials

Rob Atkinson ranchorobbo at
Tue Dec 9 17:27:34 EST 2014

>One word of caution.
>Don't put the radials too far under the surface. 2, 3, 4, or 5 inches down is too deep! Remember that you will be cooking the soil ( introducing losses ) between the radial wires and the surface.
>Try to keep the radial wires an inch or less below the surface.

That is absolutely not true.  There is no difference in performance at
any of those depths.



More information about the Topband mailing list