Topband: Hi-Z Antennas Two Element Array Systems 2-LV2-5

[Charlie Cunningham]

How's the phasing controlled amongst those antennas, Gary? Coaxial phasing
lines and relays? Or more complex networks?

73
Charlie, K4OTV

-----Original Message-----
From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of Gary
Smith
Sent: Tuesday, February 11, 2014 6:12 PM
To: Topband at contesting.com
Subject: Re: Topband: Hi-Z Antennas Two Element Array Systems 2-LV2-5

I have the triangular array and the antennas are the same. No, you 
don't need radials with these. My elements are about 20' tall and the 
preamp mounted to the antenna itself is attached to a ground rod at 
the base of the antenna.

Works great.

73,

Gary
KA1J

> Do the two verticals require any type of radial system or can a simple
"array" of 4 to 6 20' radials do the job??
> 72, Jim R. K9JWV 		 	   		  
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
> 




---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com

_________________
Topband Reflector Archives - http://www.contesting.com/_topband