Topband: 50 ohm direct burial coax cable

[Richard (Rick) Karlquist]

On 6/5/2014 5:43 AM, bruce whitney via Topband wrote:
> Again,
> You might want to compare this cable to the LMR400-DB.
> It has performed well for me.
> http://www.davisrf.com/buryflex.php
> Bruce W8RA
>

Bury Flex is good cable, however, in comparison
to LMR400, its velocity factor is 10 to 15% lower.
This means that its insertion loss will be 10 to
15% higher.  The VF also isn't as well controlled
in Bury Flex, in case you are making phasing lines.
I use both kinds, in the appropriate applications.

Rick N6RK