Topband: New MFJ 259C available

[Carl]

Can HP microwave loads be used? I have a set good to 24 GHz and another to 
50 GHz.

Carl
KM1H


----- Original Message ----- 
From: "Jim Brown" <jim at audiosystemsgroup.com>
To: <topband at contesting.com>
Sent: Tuesday, March 04, 2014 1:35 PM
Subject: Re: Topband: New MFJ 259C available


> On 3/4/2014 7:25 AM, Paul Christensen wrote:
>> My only concern with the VNWA is in its ability to measure Topband 
>> antenna systems where sweeps are required into the AMBC band.
>
> I'm a VERY happy owner of the 3E model VNWA. I've made measurements on my 
> 160M antennas with no difficulty, but I'm out in the boonies, not close 
> enough to strong BC signals to have seen any issues.
>
> As to precision of calibration loads -- after I got the VNWA, I did a 
> search looking for calibration loads, and quickly learned that if you want 
> better than 1% precision, it's easy to spend as much for the load as for 
> the VNWA itself!
>
> 73, Jim K9YC
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4335 / Virus Database: 3705/7150 - Release Date: 03/04/14
>