Topband: RG-6 questions

[Eddy Swynar]

Hi Guys,

Here's another rather neat coaxial cable site allowing one to "...plug & play":

http://timesmicrowave.com/calculator/?productId=52

~73~ de Eddy VE3CUI - VE3XZ





On 2015-03-16, at 9:32 AM, mstangelo at comcast.net wrote:

> Rick,
> 
> You can look at the attenuation on a data sheet.
> 
> Here is an example of a Belden RG-11 type CATV cable. The center conductor is copper coated steel but the attenuation at 1Mhz is low:
> 
> <https://edeskv2.belden.com/Products/index.cfm?event=showproductdetail&partid=7131>
> 
> Since it is used the receiving it is only rated at 300v. I'd be concerned about transmitting with high power or a high SWR.
> 
> Mike N2MS
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband