Topband: K1FZ ground rod difficulty

[GALE STEWARD]

That link got screwed up. try this...
www.harger.com






      From: GALE STEWARD via Topband <topband at contesting.com>
 To: topband <topband at contesting.com> 
 Sent: Wednesday, April 6, 2016 7:28 PM
 Subject: Re: Topband: K1FZ ground rod difficulty
   
Harger Lightning and Grounding shows a copper plate as an alternative to ground rods. This is an interesting website...
Copper Ground Plates


  
|  
|  
|  
|  |    |

  |

  |
|  
|  |  
Copper Ground Plates
  |  |

  |

  |

 
73, Stew K3ND

      From: "donovanf at starpower.net" <donovanf at starpower.net>
 To: topband <topband at contesting.com> 
 Sent: Wednesday, April 6, 2016 5:34 PM
 Subject: Re: Topband: K1FZ ground rod difficulty
  
Hi Mike, 


Yes, I meant use of XELEDOP to measure the patterns of arrays 
of Beverage antennas. The results of XELEDOP measurements 
of the patterns of a large electrically steerable array of 220 foot 
Beverages used from about 7-30 MHz were never published. 


I'm sorry I wasn't clearer by failing to clarify that the XELODOP 
reference was for pattern measurements of a log periodic antenna. 


73 
Frank 
W3LPL 






  
_________________
Topband Reflector Archives - http://www.contesting.com/_topband