Topband: Waller Flag construction and performance

[Ken K6MR]

Yes I did put that in. I think.  I modeled the whole thing and duplicated the phasing line lengths and crossover at the feedpoint. Although once I get it down I’m going to recheck that again. After my blunder with the resistors there’s no telling what else I’ve done wrong.

Thanks,

Ken K6MR



From: Lee STRAHAN<mailto:k7tjr at msn.com>
Sent: Tuesday, April 26, 2016 18:16
To: topband at contesting.com<mailto:topband at contesting.com>
Subject: Topband: Waller Flag construction and performance

  Ken, did you remember the 180 degree phase inversion needed on the Waller flag.
It will act like a very large signal level single loop if not.

Lee K7TJR

_________________
Topband Reflector Archives - http://www.contesting.com/_topband