Topband: Waller Flag construction and performance

[Bob K6UJ]

Don't bash yourself too hard Ken.  I have had my share of oops, what did 
I do ?  :-)
It will be interesting to see what happens when you disconnect the feedline.


Bob
K6Uj

On 4/26/16 6:33 PM, Ken K6MR wrote:
> Yes I did put that in. I think.  I modeled the whole thing and duplicated the phasing line lengths and crossover at the feedpoint. Although once I get it down I’m going to recheck that again. After my blunder with the resistors there’s no telling what else I’ve done wrong.
>
> Thanks,
>
> Ken K6MR
>
>
>
> From: Lee STRAHAN<mailto:k7tjr at msn.com>
> Sent: Tuesday, April 26, 2016 18:16
> To: topband at contesting.com<mailto:topband at contesting.com>
> Subject: Topband: Waller Flag construction and performance
>
>    Ken, did you remember the 180 degree phase inversion needed on the Waller flag.
> It will act like a very large signal level single loop if not.
>
> Lee K7TJR
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband