Topband: UHF Male connector for 1/2" cellflex

Bob K6UJ k6uj at pacbell.net
Sat Jun 4 00:40:03 EDT 2016


Thanks everyone for info on a source for the UHF connectors.
This is a great forum, help is here, all you gotta do is ask ! :-)

Bob
K6UJ




On 6/3/16 8:20 PM, donovanf at starpower.net wrote:
> http://www.ebay.com/itm/PL259-UHF-male-1-2-for-Corrugated-copper-Standard-Andrew-Heliax-connector-QW-/321943672180?hash=item4af5569574:g:wKwAAOSw9uFW9Pfh
>
> ------------------------------------------------------------------------
> *From: *"Clive GM3POI" <gm3poi2 at btinternet.com>
> *To: *"Greg Zenger" <n2gz at gregzenger.com>, "Bob K6UJ" <k6uj at pacbell.net>
> *Cc: *"topband" <topband at contesting.com>
> *Sent: *Friday, June 3, 2016 11:15:11 PM
> *Subject: *Re: Topband: UHF Male connector for 1/2" cellflex
>
> Check out Chinarf  on ebay, I have just bought 10 off PL259 Plugs to 
> LDF4-50
> for about $4.5 delivered. High quality product.
> Do a search for UHF Plug or UHF plug to 1/2" corrugated copper.  73 Clive
> GM3POI
>
> -----Original Message-----
> From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of Greg
> Zenger
> Sent: 03 June 2016 22:53
> To: Bob K6UJ
> Cc: topband
> Subject: Re: Topband: UHF Male connector for 1/2" cellflex
>
> Bob,
> Take a look at RFU502-H1 from RF industries.  They sell for ~$35 each new.
>
> I don't have experience with that particular connector, but I suspect it
> will work just fine with your cable.
>
> Otherwise the RFS connectors like the ones in your link are super easy to
> install. I've installed about a hundred of them over the years.
>
> Greg, N2GZ
>
>
> On Fri, Jun 3, 2016 at 6:26 PM, Bob K6UJ <k6uj at pacbell.net> wrote:
>
> >
> > I need to have a PL-259 type connector on one end of a 1/2" cellflex
> > cable I am making up.  I have an N connector on one end, no problem.
> > I like the EZfit connectors and was hoping to find one for UHF male
> > (PL-259)
> >
> > I can get another N connector and then get a N to PL-259 adapter but I
> > would prefer to not have an adapter if possible.  I did find one
> > (below) its not an Andrew EZfit but looks to be about the same thing.
> > Know of other options ?
> >
> > http://www.theantennafarm.com/catalog/rfs-734745-5804.html
> >
> > Bob
> > K6UJ
> >
> > _________________
> > Topband Reflector Archives - http://www.contesting.com/_topband
> >
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>



More information about the Topband mailing list