Topband: UHF Male connector for 1/2" cellflex

[Clive GM3POI]

This is the link I used http://www.ebay.co.uk/itm/262144126639?_trksid=p2060353.m2749.l2649 <http://www.ebay.co.uk/itm/262144126639?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT> &ssPageName=STRK%3AMEBIDX%3AIT 

 

73 Clive GM3POI

 

From: Bob K6UJ [mailto:k6uj at pacbell.net] 
Sent: 04 June 2016 04:40
To: topband
Cc: Clive GM3POI
Subject: Re: Topband: UHF Male connector for 1/2" cellflex

 

Thanks everyone for info on a source for the UHF connectors.
This is a great forum, help is here, all you gotta do is ask !  :-)

Bob
K6UJ





On 6/3/16 8:20 PM, donovanf at starpower.net wrote:

http://www.ebay.com/itm/PL259-UHF-male-1-2-for-Corrugated-copper-Standard-Andrew-Heliax-connector-QW-/321943672180?hash=item4af5569574:g:wKwAAOSw9uFW9Pfh

  _____  

From: "Clive GM3POI"  <mailto:gm3poi2 at btinternet.com> <gm3poi2 at btinternet.com>
To: "Greg Zenger"  <mailto:n2gz at gregzenger.com> <n2gz at gregzenger.com>, "Bob K6UJ"  <mailto:k6uj at pacbell.net> <k6uj at pacbell.net>
Cc: "topband"  <mailto:topband at contesting.com> <topband at contesting.com>
Sent: Friday, June 3, 2016 11:15:11 PM
Subject: Re: Topband: UHF Male connector for 1/2" cellflex

Check out Chinarf  on ebay, I have just bought 10 off PL259 Plugs to LDF4-50
for about $4.5 delivered. High quality product.
Do a search for UHF Plug or UHF plug to 1/2" corrugated copper.  73 Clive
GM3POI

-----Original Message-----
From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of Greg
Zenger
Sent: 03 June 2016 22:53
To: Bob K6UJ
Cc: topband
Subject: Re: Topband: UHF Male connector for 1/2" cellflex

Bob,
Take a look at RFU502-H1 from RF industries.  They sell for ~$35 each new.

I don't have experience with that particular connector, but I suspect it
will work just fine with your cable.

Otherwise the RFS connectors like the ones in your link are super easy to
install. I've installed about a hundred of them over the years.

Greg, N2GZ


On Fri, Jun 3, 2016 at 6:26 PM, Bob K6UJ  <mailto:k6uj at pacbell.net> <k6uj at pacbell.net> wrote:

>
> I need to have a PL-259 type connector on one end of a 1/2" cellflex 
> cable I am making up.  I have an N connector on one end, no problem.  
> I like the EZfit connectors and was hoping to find one for UHF male 
> (PL-259)
>
> I can get another N connector and then get a N to PL-259 adapter but I 
> would prefer to not have an adapter if possible.  I did find one 
> (below) its not an Andrew EZfit but looks to be about the same thing.  
> Know of other options ?
>
> http://www.theantennafarm.com/catalog/rfs-734745-5804.html
>
> Bob
> K6UJ
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband